Dropstone Farms

So the other day the girls laid only a single egg. It was bizarre. Then, the day after, we got five eggs. We normally get between three and six eggs per day, so having an egg-free day out of the blue was kind of bizarre. Everything seems to be back to normal. I guess they needed a break.

In a perfectly reasonable segue, I built a new anvil stand today. My old stand was built of a mess of 2×12s glued and bolted together (see figure 11 on this page). It was unstable on uneven ground and I never felt really good about it. Also, even with a mess of silicone caulk on top my anvil, being an old Peter Wright, rang loud enough to require earplugs. So I built a new stand out of 2×12 by screwing together four lengths and making a box with either end open. Then I filled it full of dirt.

The silver-grey stuff is scale that forms on iron when it's being worked. It then flakes off and makes a mess. I don't know if the resolution is high enough to see the earwig that ran out when I moved the anvil, but it's there.

I call it my Rammed Earth Anvil Stand on account of I compacted each layer of dirt with a chunk of 2×4 and a sledge. It came out rather well, I think. It’s much more stable than the old one because the dirt inside conforms to the grass and soil it’s resting on. Also, the much greater mass means that my hammer blows move more metal and the anvil doesn’t hop around when I’m working. Best of all, the column of dirt damps the anvil and it’s not so freaking loud all the time. As a further upside, I can tell the relative temperature of the iron by the changing sounds as the metal cools. Nifty, eh? Also, very cheap.

This is my anvil. You can see the dirt it's resting on. It's like a raised bed for metalworking.

My only concern it that the weight and the hammering will cause the screws holding the whole shebang together to pull out. If this happens, I’ll just run some bands around the outside for strength and hope it holds.